Turntables are cool, right? Every boy in his childhood thinks about owning a turntable when he becomes an adult. Some dream of being a DJ, and the only thing standing between becoming a DJ is owning a turntable.
Some vinyl record collectors also own turntables to listen to the records. A gramophone is outdated and very hard to find in the market, and so vinyl collectors use turntables these days. So, how to use airplay transmitter for your turntable music?
Either you are a DJ, or you are a vinyl record collector; if you own a turntable, you will want to transmit it to your airplay device. In this modern era, Airplay is a very common thing when it comes to music enthusiasts. If you are stuck trying to transmit your turntable to Airplay, then fear no more! We will show you the exact method that you should follow for this purpose.
What Is Airplay?
Airplay is software from Apple which lets you watch videos, listen to music, and share media to and from your Apple devices.
If you have an apple tv connected television or a smart television which supports the airplay plug-in, then you can use your Apple mobile or other apple devices to connect to that tv and play the videos and audios directly on TV, whereas the video and audio file is stored in the mobile device.
Airplay also supports music transmission. There are specific speakers in the market that has Airplay enabled. If you want to integrate any of your music devices into the speakers, you can use Airplay to do so. Airplay will let you play music, podcasts, and other audio-based media.
If you have multiple good speakers in your house that support Airplay, you can play the same music in multiple speakers situated in different parts of your house. You can also control which speaker plays and which speaker stays off using the airplay service.
How A Turntable Functions
In the world of vinyl records, a turntable-based setup is a very common practice. This also goes for professional DJs and music producers.
A turntable is a simple music-playing device that plays vinyl records. The turntable is made of a vinyl holder which spins the vinyl disk and a long needle that touches the vinyl disc. After you put the disk inside the turntable, it will start to spin the disk.
The vinyl disk will be spinning at a consistent speed which is very important so that the speed of music is also consistent. The needle that touches the spinning disk does the work of reading the grooves of the vinyl disk. By reading the disk, the turntable turns it into a music signal.
Now the turntable can barely be used as a standalone device. To make the music signal produced by the turntable into audible music, you will need a full music station setup.
An amplifier and a speaker system are the bare minima for a turntable to produce music. You can also integrate other music instruments and mics into the turntable if you want to.
Why Stream From Turntable To Airplay?
For people who own a turntable, it is very common to want to stream the music from their turntable wirelessly. At the same time,
Airplay is a very popular wireless music system both among apple users and others who don’t use any Apple devices. There are various benefits you can get from using Airplay.
Here are some of the benefits of using Airplay for turntable:
- Airplay allows the users to stream wirelessly to any Apple devices or devices that support Airplay.
- By using Airplay, a user can stream any music to multiple speakers at the same time.
- Airplay allows the user to play music on Apple devices such as apple home pods and apple tv.
- Airplay has a very user-friendly interface that helps the users to roam their music list freely.
- Users can use their existing Apple devices such as iPhones and iPads to navigate in Airplay. Thus, Airplay gives adds great value to the apple ecosystem experience.
- Vinyl records found these days tend to be very old. The sound quality of these vinyl records is not parallel to the music quality we are accustomed to. Airplay greatly improves the sound quality of these vinyl records, which gives the users a pleasant experience.
- Airplay gives the user the freedom to control all the speakers that are connected to the airplay system. This allows the user to play and pause the speakers whenever the user wants.
Top Airplay Transmitters
Turntables are mainly analog devices. If you want to stream your turntable to an Airplay-supported speaker, you will need to do three things.
Firstly, you will have to connect your turntable to a transmitter device which will make your turntable’s analog output to a digital signal.
Secondly, you will have to connect a computer system to the transmitter device, preferably a Mac computer. Finally, you will have to connect the Airplay-supported speakers with the computer so that the speakers can play the music from the turntable.
For this procedure, the role of a good transmitter is undeniable. Here is a list of our top-picked transmitters for Airplay.
Avantree TC417 Bluetooth Transmitter: It is a Bluetooth transmitter that works both as a transmitter and a receiver. It can be used on various devices. For your turntable, this can be a great addition as it can transmit to any device such as tv, tv box, and other receiver devices.
This device is compatible with all the tv brands in the market. It has very low latency. There is also a built-in battery which you can use when there’s no electricity. The battery gives 20 hours of stream time with only 2 hours of charge time.
ACEMAX M5 Audiocast: It is a wireless music adapter that will stream high-definition music from one device to another. It supports a wide range of devices that includes airplay service. This has a higher Bluetooth technology that gives very little lag and connects very quickly. The battery time is average for this transmitter.
The main reason that users use this transmitter is that the audio streamed from this transmitter is lossless. The audio signal is generally of high definition, and the music sounds crisp with crystal clear lyrics.
Glovery Bluetooth Transmitter: This transmitter features a digital optical auxiliary jack. The built-in battery gives a massive 25 hour stream time with only 2 hours of charge. The built-in port for a 3.5mm jack lets the user connect the turntable very easily.
You can choose this model if you frequently play music in the turntable outdoors. As this transmitter has long battery health, you can easily play music a whole day continuously without worrying about battery life.
Prideal Long Range Bluetooth Transmitter: This Bluetooth transmitter will allow you to transmit music from your turntable to faraway devices. It features two antenna systems that enable this transmitter to cover a long range of areas. If you are trying to send the music signal to a device that is in another room or very far away from the transmitter, you can use this particular model without any doubt.
The long-range supported antennas in this transmitter will transmit the audio signal to faraway places. The signal will also be strong enough to penetrate through thick walls, which will allow you to transmit music from one room to another.
How To Use Airplay Transmitter For Your Turntable Music?
Now that you have gained knowledge about different transmitters available in the market, it’s time to learn how you can connect a transmitter properly to your turntable to make the turntable streamable through Airplay.
Besides using a transmitter, there are three ways that you can use to transmit music from turntable to Airplay. We will explain all three of the processes so that you can use whichever you find easier for you.
1. Using A Transmitter
The first and most common procedure is by connecting your turntable to a transmitter device. You will need to procure a transmitter device that will help you to transmit the audio signal from the turntable.
After you have got yourself a transmitter, follow the next steps to get your airplay system ready. At first, load your turntable with a music dish that you want to play.
Now connect your turntable with the wireless transmitter that you gave gotten beforehand. Turn on the transmitter, and the transmitter will start to give a Bluetooth signal.
You can catch that Bluetooth signal with your apple devices such as apple tv or home pod. Now after connecting the transmitter, you can easily play any music from your turntable to Airplay through the apple device.
2. Using AirPort Express
The AirPort Express is Apple’s own transmitter device that features a 3.5mm audio jack. You can use AirPort Express to plug your turntable in.
An AirPort Express can easily connect to any airplay-enabled device. You will not need to connect it through Bluetooth as it will be done automatically. Apple gives its user an effortless experience as all their devices syncs automatically.
The only problem is that Apple discontinued their Airport Express product line for some years now. However, You can find some old models on eBay and other electronics markets. It is a great additional device for any Apple enthusiast.
3. Using An iPad
It is possible to connect your turntable to an iPad and then use airplay service in it. Though this process is a bit hard than the previous methods, it is usable if you don’t have a transmitter or AirPort Express.
This process requires an audio adapter. The audio adapter takes the signal from the turntable and feeds it to the iPad. Then you can use the iPad to connect to Airplay and listen to music through Airplay.
If you face difficulty while doing this, search YouTube for this method. There are many videos available that will show you how to do this practically.
Conclusion:
These procedures are super easy to follow, and anyone with a little knowledge of Airplay can easily comprehend how to stream turntable music through Airplay.
Suppose you have followed the steps given above and integrated your turntable, then congratulations.
Now you will get better sound quality from your turntable music and easy navigation using the airplay service. I hope now you know how to use airplay transmitter for your turntable music.
FAQs
1.What Is An Airplay Transmitter?
Ans: An Airplay transmitter is a small device that helps to send music from your computer or other audio-enabled devices to your stereo. This can be useful if you want to allow friends or family members to listen to music stored on your computer, for example, without having them install any additional software.
2.How Does An Airplay Transmitter Work?
Ans: Typically, an Airplay transmitter connects to your stereo via a USB port or an analog audio input. Once connected, you will need to locate the music files you want to send over airwaves and add them to the transmitter’s “library.” So select these files (or other compatible music tracks) and press play on your stereo.
3.What Are The Different Types Of Airplay Transmitters?
Ans: There are different types of Airplay transmitters, each with unique features and benefits. Some examples include:
– The Apple Airport Express is an external hard drive that doubles as an Airplay transmitter.
– The JBL Link 20 is a compact Bluetooth speaker dock that also functions as an Airplay receiver.
– The Denon AVR-X3300S 7.1 AV Receiver supports DLNA (Digital Living Network Alliance) and Air Play streaming from your compatible devices, including the latest iPhones, iPads, and iPod Touches.
4.Which Devices Can Use With An Airplay Transmitter?
Ans: – Most Airplay transmitters are compatible with a wide range of audio devices, including computers, iPhones, iPads, and iPod Touches.
– Some models (like the Apple Airport Express) can also use as networked hard drives for sharing large music libraries between multiple devices.
5.How Do I Connect My Airplay Transmitter To My Music Player?
Ans: There are several ways to connect your Airplay transmitter to your music player. You can either use the included cable or Bluetooth connection.
6.How Do I Use My Airplay Transmitter To Play Music From My Computer Or Other Devices?
Ans: To play music from your computer or other compatible devices using Airplay. First, you need to connect your device transmitter. Then open the streaming audio player on your computer or compatible device and find the appropriate media file(s) for playback. Once located, press “play” on your stereo and enjoy.