Do you want to make your headphone cable y-split? You may find some headphone cable y-splitter in markets. But their build quality isn’t satisfying. That’s why I decided to make a cable splitter myself and give you some tricks to make it.
So, how I can make my headphone cable Y-split? I will make a converter that has one 3.5mm port and two 3.55mm jacks. It will help me to connect my headphone to a two-channel audio interface and pc. So, without any further ado, let’s get started.
What Does A Y-split Headphone Cable Do?
Most of the pc have two output ports for a 3.5 mm headset. One works for the right and left channels. And other works for the microphone. But most of the headphones have one jack. Of course, there are some two-jack headphones. But most of them are one jack headphones.
If you have one jack headphone, you can’t use it properly with your pc. Whether you can use your headphone for audio output or you can connect your headphone to the microphone. If you make a y-split headphone cable, you will be able to use your headphone for audio output and microphone at the same time.
Essential Things
You will need some essential things to make a y-split headphone cable.
1.Headphone Socket (4 pins)
You will need a four-pin headphone socket to make a headphone cable y-split. Why should I buy the four-pin headphone socket? For your information, one pin will work for the right channel, and one will work for the left channel, one for the mic, and one for the ground.
2.Wire
You will find many types of headphone cable wires in the market. You have to buy five wires. Five wires should be of different colors. If you buy four different colors of wire, it will help you to connect them with sockets and jacks. Yes, it isn’t mandatory to use different colors of wires. You can use any type of wire.
Why should I buy five wires cable? Because two-wire will be needed for grounds, one will be needed for the right channel, one for the left channel, and the last one for the mic. I brought red, green, yellow, and black wire. Red for the right channel, yellow for the left channel, green for the mic, and two black wires for grounds.
3.5mm Jack (3pin)
You will need two 3.5mm male 3pin jacks to make a headphone cable y-split. One jack will work for the headphone and one for the mic. Why do I need a 3pin 3.5mm jack? One pin will work for grounds, and one will work for the left channel and the last for the right channel. On the other side, one will work for grounds, and the other will work for the mic.
4.Glue
You may need a glue gun or super glue. To make your cable hard, you may have to use some covers on 3.5mm jacks, wires, and sockets. You have to attach those covers with super glue or a glue gun. You can use any type of glue. But remember not to glue on any connection spot.
5.Soldering Iron
I hope you have a soldering iron. It’s a mandatory thing in electronic works. You have to connect some wires to make a headphone cable y-split yourself. That’s why you will need a soldering iron.
How You Can Make A Headphone Cable Y-split Yourself
It isn’t complicated or stressful work to make a headphone cable y-split. Follow the following steps to make a headphone cable y-split.
How to Straighten Out Your Headphone Wires?
If your headphones are not sitting correctly in your ears, they can “straighten them out” using a gently clamping motion. You should only do this if you can do so without damaging the headphone wiring. The aim is to remove any kinks or twists in the headphone wire. Once straightened out, securing them with a cable tie or band is essential. This will prevent them from becoming tangled and creating any more unwanted stress on the wire.
Headphone wires can become twisted and tangled in a hurry if not appropriately handled. Twisting the wire further will only make it worse. Instead, gently pull on one end of the wire while holding the other end close to where it connects to your audio device.
Slowly guide the two ends back together until they are neatly coiled up. Keeping your wires from becoming twisted is essential in two ways. First, it can be challenging to use your headphones wirelessly if they are kinked up. Secondly, excess twisting can create electrical damage to the wire over time. By straightening out your wires before using them, you will prevent both of these problems from occurring.
Some tips to keep your headphone wires out of twirling:
1. Make sure your cords are stored neatly when not in use.
2. Keep them coiled up while not in use.
3. Don’t wrap them around your wrists or neck excessively.
4. Keep them away from metal objects, like screws and nails.
5. Avoid putting them in humid environments or areas with high levels of dust accumulation.
6. Avoid storing them in damp locations or near water sources.
Step 1: Connect Wires With The 3.5mm 4 Pin Socket Headphone Socket By Soldering
You may be thinking, there are five wires, but the socket has only four pins. How do I connect five wires to the four-pin socket? Don’t worry. There is a solution. Connect the red wire with the right channel pin, the yellow wire with the left channel, and the green wire with the mic. And there are two black wires left. You have to connect those wires with the ground pin.
I am using a four-pin 3.5mm female input socket. Three pins are on the same side and one on the opposite side of the three-pin. In three pins, the first one is for the right channel, the second is for the left channel, and the third is for the ground. You may understand the last pin for the microphone.
Why Is It Important To Keep Your Wires From Twirling?
Twirling headphone wires can create an electric field that causes unpleasant audio interference. This can occur when the areas mix and create distortion in the audio signals passing through your headphones. When twirling your headphone wires, it’s essential to keep them coiled up, so they don’t wind around each other excessively. To avoid electric field interference, keeping your headphone wires as tangle-free as possible is best. This means keeping them coiled up and stored in a tidy location when not in use.
Twirling headphone wires can cause permanent damage to your audio equipment. When the cables are twisted around, it creates a lot of microscopic stress points that can eventually break the wire and affect the performance of your device.
By keeping your headphone wires organized and bundled, you can significantly reduce the chances of this happening. Another reason it is essential to keep your headphone wires organized because it can be tough to untangle them once they are wrapped around something.
This can be especially problematic if you have a lot of headphones and don’t have enough hands free to help you. If your headphone wire gets tangled up, try using a pair of pliers or a small knife to cut the wire off at the source and then unravel it from the attached object. Overall, keeping your headphone cords tidy and organized is essential to avoid damage.
Pull Your Headphone Cord Through The Headphones
Pull your headphone cord through the headphones, and line up the two ends of the headphone cord. Then, twist each end of the headphone cord together three times. Finally, hold onto the ends of the headphone cord and pull tight. The Y-split should now be created.
Step 2: Connect Three Wires With The First 3.5mm Jack By Soldering
Do you remember I mentioned that you have to buy two 3.5mm three-pin male jacks? Pick the first one. And connect three wires with it. Red with right channel pin, yellow with left, and black with the ground.
Set The Wire Straight Using A Weight Or Flat Surface
1) Cut the wire near one of the ends, which is 1/2″ shorter.
2) Twist each cut wire end around a screwdriver or drill bit until they form a tight Y-shape. Ensure that both twists are on the same side of the wire (i.e., right twist if viewing from left).
3) Hold onto one end of each twisted wire and carefully pull them apart, ensuring to keep hold of both cables at all times.
4) Twist the ends of each wire together, ensuring they are correctly seated on both sides of the split. Trim any excess wire.
5) Enjoy your newly split Y-cable.
Step 3: Connect Two Wires With The Second 3.5mm Jack By Soldering
There is one 3.5mm jack and two wires left. Connect the green wire with the microphone pin and the black wire with the ground by soldering. You can cover the wires and extended part of the jack by glue gun. Your y-split headphone cable is ready.
Step 4: Connection
Put the headphone jack into the y-split cable socket. Then, put the first jack into pc audio output socket and the second jack into the microphone socket. Then enjoy the benefit of the y-split cable.
Hang The Headphones From A Stand, A Hook, Or a Desk Edge
Measure the cable distance from the headphone jack to where you want it to split. Trim one end of the cable so that it is equal in length to your measured distance, and then cut it with a sharp knife or scissors. Repeat on the other side. If your cable is already split, rejoin the two cut ends by overlapping them and sewing with a needle and thread. Or,
Fold the headphone cable in half so that one earphone is attached to one side of the line and the other is connected to the other. Twist each end of the cord around itself a few times, then pull tight. Should now split the headphones in two. This is a great way to make your headphone cable y-split yourself if you’re ever having trouble connecting the two earphones.
Final Verdict
Usually, we buy a headphone that has one socket. But our pc has two sockets. One for the audio output and the other for the microphone. That’s why we can’t use our headset to pc properly. Whether we have to connect for audio or mic.
The y-split headphone cable can solve this problem. You can buy a y-split headphone cable from markets, but I tried to show you how you can make a y-split headphone cable yourself. We hope now you know how I can make my headphone cable Y-split. We hope you understand how you can make a y-split cable. That’s for today.
FAQs:
1.How To Make A Headphone Cable Y-Split?
Ans: In order to split the headphone cable in half, you will need some sharp object (like a knife or scissors) and open-end wire cutters. Start by cutting the cord above where it plugs into your audio device. Next, use the wire cutters to separate the two threads near their plugs. Finally, unsnap each pin from its housing and enjoy your newly divided headphone cable.
2.What Are The Different Types Of Headphone Cables?
Ans: There are a few types of headphone cables, but the most common ones include single-ended (SE) and stereo cable configurations. Single-ended cables have one plug on one end and another pin on the other end, while stereo cables have two separate plugs on each end. There are also bi-directional headphone cords available, allowing you to listen to music in both directions simultaneously.
3.What Is The Difference Between A Y-Split And An X-Split?
Ans: A y-split is simply a split in the cord where a metal ring connects the two ends. An x-split, on the other hand, is a more advanced type of headphone cable splitter that uses an extra wire inside of the cord to help keep it together when it’s split.
4.What Is The Benefit Of Making A Headphone Cable Y-Split?
Ans: A y-split allows you to keep your audio cords tidy and organized, which can help improve your audio equipment’s overall look and feel. Additionally, a y-split cable is easier to manage than an x-split cable because it doesn’t have as many wires inside of it.
5.How Do I Make A Headphone Cable Y-Split?
Ans: The easiest way to make a headphone cable y-split is to use open-end wire cutters. Start by cutting the cord above where it plugs into your audio device, then separate the two lines near their plugs. Finally, unsnap each pin from its housing and enjoy your newly divided headphone cable.
6.Why Is It Essential To Make A Headphone Cable Y-Split?
Ans: A y-split headphone cable can help improve the overall look and feel of your audio equipment and make it easier to manage. Additionally, a y-split line is more accessible to organize than an x-split cable because it doesn’t have as many wires.
7.How Do I Make A Headphone Cable Y-Split?
Ans: The easiest way to make a headphone cable y-split is to use open-end wire cutters. Start by cutting the cord above where it plugs into your audio device, then separate the two lines near their plugs. Finally, unsnap each pin from its housing and enjoy your newly divided headphone cable.
8.Can I Make A Headphone Cable Y-Split With Any Wire?
Ans: No, a y-split headphone cable requires an open-end wire cutter.
9.Is It Possible To Damage My Audio Device If I Make A Headphone Cable Y-Split?
Ans: There is no guarantee that you’ll damage your audio device if you make a headphone cable y-split, but it’s generally easier to manage and keep cords tidy if you do. Additionally, any potential damage would most likely be cosmetic.