We are living in the era of technology. Technology has made our lives easier. However, cords or wires help us to link up with technology.
You will see cords wherever you look. In your bedroom, in your bathroom, all over your house, even when you go out on the street, you will see those creepy twisted cords. Although modern technology is gradually reducing the use of wires. We can only hope that one day this world will be free of wires. But at least until then, we have to live with all these wires.
The most annoying thing about the cords is that they often get twisted when used. It happens that we stop using a wired device, for example, our headphones or earphones. When used later, you will see that it has been twisted in one way or another. Why does this happen? Why do the wires twist like this? How to keep cords from twisting up? Let’s find out.
Why Do the Cords Get Twisted?
Before we learn how to prevent the wires from twisting, let’s first know why the wires get entangled. There could be several reasons behind the entanglement of the wires. If the reasons can be said in one word, then it is your insignificance. Because wires are inanimate objects. It is not that they will get entangled by themselves. This happens due to your lack of awareness.
Related: Best SPL Meter For Home Theater
Now let’s find out the main reasons behind the twisting of the wires.
- The main reason is, as we have already learned, your lack of awareness. If you leave our devices at random, it is only natural that their cords would get tangled.
- If your devices get old, then their cords become weak. This increases the chances of getting twisted.
- If the cords become too long, usually more than 1.5 meters, they are more likely to be twisted.
- Sometimes the cords can be twisted due to structural reasons.
- Cords can get tangled if not stored properly.
- When not used properly, the cords can get damaged and twist.
- Excessive tension in the cords increases the chances of twisting.
How to Keep Cords From Twisting Up?
Now let’s come to the real thing – how to keep your cords from twisting up? Wires are a thing that seems to be twisted. So you must always keep in mind to use and store them properly. Let’s not know how to protect the wires from twisting.
- You need to be wary of using wired devices. You should store your cords properly.
- As the wires get older, you should change them.
- You should clean the wires regularly. In that case, you must take electrical precautions.
- Different cables have different usage patterns. You will first get to know them better and then use the cables accordingly. For example, thin wires like headphones or earphones require more care than relatively thick wires.
- Using relatively long wires is a bit complicated. So if you use them properly, they are less likely to get twisted.
- There are several gadgets for storing or arranging cables. You can use them if you want. These gadgets are very effective in protecting the wires from getting entangled.
Related: Best IEM Cables Of 2023
Top 5 Gadgets That Can Protect Cords From Twisting Up
In addition to usage rules and preservation rules, you can use some gadgets to prevent cables from getting tangled. There are many gadgets in stores and online that can confuse you. So now we will know about the top 5 gadgets out of them.
- TYLT: TYLT is a Syncable Duo with both Micro USB and Lightning Cable. Whatever you choose, it is a very simple design. This helps to wrap the wires in a circle. It is flexible and prevents the wires from twisting. You can hang it in any bag or carry it by hand.
- Recoil: You can use a Recoil any of your cords cannot be replaced or there is no opportunity to buy a new one. It can hold a wire at both ends. There is a small hook inside the recoil. With a little pull, you can wind the wires. Now you can coil and uncoil when needed.
- Cord Minder: Many times you have to use multiple cords at the same time, for example, multiple chargers and earphones. Cord Minder is a very good gadget for arranging them in rows. It has an adhesive back to fit anywhere. You can easily hang the cords on the side of the desk, behind the door, or in any convenient place if you want.
- Budsband: Budsband is a small, silicone gadget that fits the cord near the base of the headphones. First, you have to attach it to the base of the cord. Then wrap the whole cord and stick it with the Budsband on the other side. The Budsband is very convenient because it sticks to the cord and you can reduce the amount of cord as needed. It has the advantage of hanging in the bag. As it is small in size, you can keep it in your pocket if you want.
- Zipbuds: The zipper of the Zipbuds simply keeps the wires untangled. It is easier to use than other cords. They are also durable. You can shorten the earphone cord with the help of the zipper.
Why Is It Important To Keep Your Wires From Twirling?
So, as we have seen, the wires can get twisted if you aren’t careful. But why does this happen? There are a few reasons behind the twisting of wires. Here are some of them:
You Might Be Incorrectly Using The Cord:
The cords can become tangled when you’re not using them properly. For example, suppose you’re trying to use your headphone cord to tighten up your shoelaces or tie them faster than they would typically go together. In that case, that will create problems because nothing prevents outgoing signals from getting mixed up.
You Might Be Accidentally Pulling On The Cable:
It happens when you’re simply trying to move the cord around and accidentally snag it on something.
The Cords Are Being Moved Around A Lot:
If your cord constantly moves (due to air pressure changes or vibrations), it gets to tangle up more quickly.
The Wires Are Of Different Lengths:
When two wires are of different lengths, they can become entangled quickly because their paths will cross multiple times.
There Is Debris In The Vicinity:
Anything that gets caught between the wires and the plug will cause them to get tangled. So It could be pieces of paper, dust bunnies, or anything else in your way.
You Have Too Many Cords:
When you’ve got a lot of cables all over the place, it becomes difficult (and sometimes impossible) to untangle them without help.
You’re Using Outdated Wiring:
Older homes might use wiring prone getting to tangle up. So you’ll need to take extra precautions when trying not to create problems for yourself.
Removing Kinks
There are a couple of things you can do to remove kinks from cords:
Use A Hair Dryer:
s is going the wire to make it easier for you to pull out the kink.
Try Using An Old-Fashioned Toothpaste Tube:
When you squeeze some toothpaste onto the end of a plastic tube, it will have strong shelf anon. Squeeze about half an inch or so of toothpaste onto one side of the cord and hold on with your other hand. Stick the open end of the tube into at least one knot and pull gently. Repeat on the other side of the cord.
Use A Heated Iron:
If you don’t want to use any of the above methods, try using a heated iron to ease out kinks in cords. Place the cord onto one end of the iron and press down slowly – So it should help release any knots holding things together.
Use A Cord Cutter:
If none of the above work, you can try using a cord cutter to cut the offending cords. Make sure you wear safety goggles and gloves when doing this – cuts can be pretty sharp.
Lift Them Or Tie Them Down
There are a few things you can do to keep cords from getting to tangle:
Use Cable Ties:
When you tie cables together, ensure that the ties are tight enough, so they don’t loosen up over time.
Lift Them:
If possible, try to move cords out of the way instead of pulling them down. It will reduce the required effort and minimize the chances of accidents.
Tie Them Down:
If cables keep getting pulled apart or if they’re constantly being moved around, it might be helpful to tie them down in some way. Moreover, It will keep them from moving around and making the situation worse.
Bundled And Weighted Cables
Some cables are designing to bundle and weighted, which can help reduce the amount of cable noise produced.
Tie The Cables:
Some cables are designing to bundle and weighting your cords, ensure that you tie them together tightly so that they don’t move around.
Use Mufflers:
Some sound-dampening materials (like mufflers) can be placed between the cords and ears to help reduce noise levels.
Use Cord Guards:
Cord guards are also a good way to reduce cable noise – they typically consist of a container filled with some absorbent material placed on top of the cords. It will help to reduce noise levels and keep lines from getting tangled.
Storing Cables
Cables should store to minimize the amount of damage that can do.
Store them coiled:
When cables are coiled, they’re less likely to get damaged, and they’ll take up less space.
Protect them from dust and moisture:
Ensure to keep cables away from dirt and moisture, which can cause damage.
Store them in a cool and dry place:
Cables should store in a cool, dry area to minimize the risk of damage.
Conclusion
The wires are a very annoying thing. If you do not manage them properly, they will deteriorate quickly. This also increases the chances of them getting twisted. If you want to get rid of all these annoying problems with wires, then follow the guidelines above.
Use gadgets to keep wires tidy if necessary. Above all, follow the instructions for proper use of cables. I hope now you know how to keep cords from twisting up.
FAQ (Frequently Asked Questions):
We will discuss some randomly asked questions and their answers about keeping cords from twisting up here.
1.How to Stop Hairdryer Cable Twisting?
Ans: Fold the cord tightly and insert it into an empty toilet paper roll. You can also arrange a relatively large cord by using a toilet paper roll for larger ropes if necessary. You can keep the wires separate in this way. Keep the hair drawer separately in the drawer or a small bag if you want.
2.How to Straighten Coiled Headphone Cable?
Ans: You can straighten the twisted wires very easily with the fingers of your hand. Hold the wire with your thumb and forefinger. Then gently open the twist and wrap around your fingers from headphones to the jack.
3.How do you hide messy TV cords?
Ans: You don’t need to make any holes in the wall to hide the TV cord. Just wrap the cords with a zip tie. Then take a cloth of color that matches your walls and cover the cords. You will see that the wires blend nicely with your walls.
4.What Are Some Common Causes Of Cords Twisting Up And How Can They Be Prevented?
Ans: Some common causes of cords twisting up include improper storage, tangling with other cords, twisting during use, and movement of electronic devices. To prevent cord twisting, it is recommended to store cords neatly, separate them from other cords, use cable ties or organizers to keep them in place, avoid twisting or knotting them during use, and minimizing movement of electronic devices while cords are plugged in.
5.Are There Any Specific Types Of Cords Or Cables That Are More Prone To Twisting Than Others?
Ans: Yes, some types of cords or cables are more prone to twisting than others. For example, headphone cords or charging cables with thin, flexible wires are more likely to become tangled or twisted than thicker, sturdier cables. Additionally, cords or cables with a coiled design or those made with materials that are prone to friction, such as rubber, may also be more susceptible to twisting.