Let us think about a common phenomenon. You wake up from your bed and after doing the basic works, you are going to chill with the vibe of your favorite songs. But when you have found the headphone, you noticed that the cord of your headphone got kinked.
This seems very much irritating for all of us because whenever you need the headphone, this incident happens. And fixing this problem in the usual ways is always difficult. Sometimes the cord gets more kinked because of getting the kinks out in the wrong way. As a result of which, many people directly tear the headphone out of anger. So, how to get kinks out of headphone cords?
This common issue happens to almost all of us though you put it decently. This brings less attraction to the users to use the headphones with cords. They go to the wireless headphones as an aid but this will cost more and don’t last for a long time if it is not durable enough.
But it is a matter of happiness that in this article, I am going to show you how to get the kinks out of your headphone more easily. This will need less time than getting the kinks out of the headphone cord through the usual process. As a result, you will not need to buy wireless headphones at a comparatively more price. So, without further delay let’s start our today’s discussion about getting the kinks out of a headphone cord.
Why Does the Cord of a Headphone Get Kinked?
The wires of a headphone are usually made of copper. If you are a student of science then you should know that copper wires get kinked very easily. But the matter is you need not be a student of science to understand this. The elastic things get bend easily than the non-elastic things. So, the copper wires being an elastic thing gets bend easily and thus creates a kink.
Whenever you put the headphone in a place, you will notice that you don’t put them decently. You just grab the headphone in your hand, twist them, and make a round shape. And then you throw it in a place or put it in your pocket. As I mentioned before that the copper wires are elastic enough, the cord of your headphone gets kinked. Mainly putting the headphone in the wrong manner gat this trouble for you most times.
Why is it important to keep your wires from twirling?
The cause of tangles and knots in headphone cords can attribute to improper storage or misconfiguration. If your headphones don’t keep stored well, the wires will become twisted together. The cord gets caught on something and repeatedly pulled, eventually creating a knot.
Another issue that can lead to tangled cords is incorrect to use. For example, if you keep whipping your twine around while adjusting the earbuds. You will create more friction, resulting in kinks. If you want to avoid these issues, take a few simple steps to help keep your cords tidy and untangled:
- Store them loosely in their carrying case or sleeve when not in use.
- Don’t whip them around while adjusting the earbuds.
- Never pull on the cord excessively.
A kink in your headphone cord can be frustrating, especially when trying to enjoy your music. Luckily, you can take a few simple steps to reduce the chances of this happening. Storing your headphones loosely in their carrying case or sleeve when not in use is one way to prevent them from becoming tangled.
Another suggestion is never whipping the cord around while adjusting the earbuds. Lastly, don’t pull on the cord excessively – if it gets caught on something, let go and try again instead of yanking hard on it. By following these tips, you will help to keep your headphones cord untangled and free from kinks.
How To Get Kinks Out Of Headphone Cords?
You have already seen the reasons for which the cord of your headphone gets kinked. Now we will see some special techniques for getting the kinks out easily from the headphone cords in less time.
Solution no. 1
The first solution will be quite easier for you. For the first step, you need to find out the jack of the headphone from the kinks on the cord of your headphone. Then just push the jack to the opposite side of the kink for releasing the patch.
Now, just go with getting the jack of your headphone out of the kink. But don’t make the patch more complex by pushing it on the wrong sides. It will make the task more difficult to get solved. Just find out that through which side the jack got patched. Then push the jack in the reverse route to unleash it. It is like a road of riding.
Suppose the jack was a bike and the cord is the route. You have traveled from place A to place B through this route. Now you want to reach place A. Then what will you do? Surely you will not go through other roads except the route you have traveled to reach point B.
Otherwise, you will not be able to reach place A and it will become more difficult to reach your destination. Like this, you have to get the jack of your headphone in the reverse route. In this way, by getting the jack of your headphone out of the kink, you will see that the kink has vanished. This is the most easier way to get the kinks out of your headphone cords.
Solution no. 2
This process is a little bit difficult than the first process. In this process, we will go with the sound driver of the headphone. Choose any one of the audio drivers and push it on the reverse route through which it reached its kinked state. Now, repeat this till the kinks are out from the headphone cords.
Though it is a secondary process to be followed, it is also an easy way to get the kinks out of a headphone cord. Now, straighten the cord after getting the kinks out from the headphone cords because it may get kinked again. Rub the cord with your hand, simply put the cord on your palm and rub it softly. Then the cord will get straightened. In this way, you can get the kinks out of your headphone cords.
How to Prevent the Headphone Cords From Getting Kinked
It is necessary to take some steps to prevent the headphone cords from getting kinked easily. Though it does not have any notified effects, still it may tear the wires. For preventing the headphone cords from getting kinked easily, follow these steps.
You can buy a headphone box where you can put your headphone after use. It will not allow the headphone cords to get kinked. Again you can out the headphone by hanging them on something. Then there is less possibility of getting kinked. But make sure that there are no other wires or cords. In this way, you can prevent the headphone cords from getting kinked easily.
Running your fingers across the wires.
People make a common mistake when trying to untangle their headphones cords. Instead of gently moving the line around and working from end to end, many people will grasp at all the individual wires with their fingers, pulling them together.
It can complicate and even painful if done incorrectly – so please avoid it! If you get your cords tangled up, try using gentle heat (from a stovetop or warmer) or liquid nitrogen (a cryo-gun), as these methods are very effective at removing knots quickly. They are storing your headphones loosely in their carrying case or sleeve when not in use is one way to prevent them from becoming tangled.
Pull your headphone cord through the headphones.
This is another common mistake people make when trying to untangle their headphone cords. Instead of slowly working the cord through the port on one side of the headphones. Many people will yank it quickly through. This can cause damage to both the cord and headphones if done incorrectly. Try moving your hand very slowly and gently as you work your way through. This should go a long way in avoiding any kinks or tears.
If your headphones still get to tangle, try using heat (from a stovetop or warmer) or liquid nitrogen (a cryo-gun). As these methods are very effective at quickly removing knots. Finally, don’t pull on the cord excessively. If it gets caught on something, let go and try again instead of yanking hard on it.
Hang the headphones from a stand, a hook, or desk edge
If your headphones keep getting catches on something. If you can’t seem to get them to untangle, hanging them from a stand, hook, or desk edge might be the answer. They are less likely get to tangle up while you use them. Be careful not to let the cord hang too low. It should just touch the floor. So it’s not dangling in front of your feet or other objects. Consider purchasing a cord organizer.
If your headphones keep getting to tangle, consider investing in a cord organizer. It will help to organize and store the cords more easily, making it easier to get them to untangle when you need to use them. Various types of organizers are available – some make specifically for headphone cords. While others can hold other kinds of cords. Consider purchasing one explicitly designed for headphone cables – this will make it much easier to get the cables to untangle when needed.
Conclusion
Getting the kinks out of the headphone cords is a daily task for all of us. But it will not take more time if you follow the processes given in this article. Then you need not go to buy the wireless headphones which will bring further issues. For getting more solutions about other problems about the electronic gadgets, go through the other articles on our website. I hope now you know how to get kinks out of headphone cords.
FAQs
1.How Can I Prevent My Headphone Cords From Getting Kinks In Them?
Ans: One way to prevent your headphone cords from getting kinks is to use a cord organizer. It will help store the cords more easily, making it easier to get them to untangle when you need to use them.
2.What Are Some Ways To Get Kinks Out Of Headphone Cords?
Ans: There are various ways to get kinks out of headphone cords. One way is to use a cord organizer. It will help store the cords more easily, making it easier to get them to untangle when you need to use them. Additionally, you can try using a hair dryer on low heat as this might be able to loosen up the knots in the cord.
3.How Can I Keep My Headphones From Tangling Up?
Ans: One way to keep your headphones from tangling up is to use a cord organizer. It will help store the cords more quickly, making it easier to get them to untangle when you need to use them. Additionally, try using a hair dryer on low heat as this might be able to loosen up the knots in the cord.
4.How Do I Properly Store My Headphones So They Don’t Get To Damage?
Ans: It would help if you tried using a cord organizer to store your headphones so they don’t get adequately damage. It will help hold the cords more easily, making it easier to get them to untangle when you need to use them. Additionally, make sure that they are stored in a safe place – away from sharp objects and heat sources.
5.Can I Clean The Headphone Cords With A Vacuum Cleaner?
Ans: No, it would help if you did not clean the headphone cords with a vacuum cleaner. It could damage the line and cause it to become kinked.
6.What Is The Best Way To Put Headphones Back Together If They Get Separated?
Ans: If your headphones get separated, the best way to put them back together is to try re-connecting the cords using a cord organizer. If that doesn’t work, you can try using a headphone wire stripper to cut off the damaged section of the rope.
7.Is It Safe To Put Headphones In The Dryer?
Ans: It is not safe to put headphones in the dryer. It could damage them and cause them to become kinked.