Alas! Have you had any problem with your receiver? Don’t worry! There are various techniques on how to hook up surround sound speakers without a receiver. Hooking your surround sound speakers on your TV can be daunting. After all, you don’t want to mess up your audio or video settings. Luckily, there’s a solution – use a surround sound receiver.
A surround sound receiver takes all the audio signals from your speakers and amplifies them so you can watch your movies or TV shows in full glory. So this article will show you how to connect your speakers to a surround sound receiver without a receiver. Sounds easy enough, right? Let’s get started.
How To Hook Up Surround Sound Speakers Without A Receiver?
A speaker is a very significant device that is frequently utilized for listening to songs or audio. A user wants to get extra features from a single device. That’s why he wants a device that can support two or more devices. And a receiver provides that service.
A receiver is a helpful device for utilizing the connection between more speakers. But the receiver may break or damage any parts of it. Moreover, it doesn’t work at all and can’t be repaired for performing service. In this situation, you can follow alternative methods to catch up with surround sound speakers when you have no receiver.
Selection Which Equipment Required To Surround Sound Speakers Without A Receiver
As a user, it is an important step for selection. Because if you do a planned task, you will get more benefits from a device, and also it provides better service at a reasonable cost. Some necessary types of equipment are-
1. Check Your Speaker
Check your speaker that represents how many connections are required to complete the scheme. Normally, two surround speakers are available for attachment.
2. Check The Output Port
Check the output port because different sound systems require different ports, and every device has numerous ports. From this, you should select which port is preferable for you.
3. Select The Cable Or Medium
Select the cable or medium which you desire to apply for connection. You can implement a wired or wireless medium to hook up the surround sound.
Procedure To Hook Up Surround Sound Speakers Without A Receiver
As a user, you know well, a receiver is very important for creating a home theater. But when you can’t get a receiver, you also want to make a cinematic environment with the sound system. In this situation, you can apply the following steps to To Hook Up Surround Sound Speakers Without A Receiver:
1. Using The Bluetooth
Bluetooth is a wireless mechanism, and it’s a relaxing matter that when you apply the Bluetooth mode, there’s no need for any cable or wired medium. After connecting the Bluetooth and pairing each other successfully, you can get access audio and video services.
For setting up, you first turn on each Bluetooth mode and search for another device to attach. After finding the desired device, you press the device option to pair each other. After pairing, each device gets access to perform the work.
Before using Bluetooth, you ensure which device you want to connect to, and this device must assist the Bluetooth. Some modern devices can support Bluetooth mode. The ancient device has no access to the Bluetooth option. That’s why the old device can’t hook up surround sound speakers by applying Bluetooth.
2. Using A Hub
A Hub is an amazing product, and it works just like a receiver. Although a Hub isn’t so popular, it operates by using receiver theories. It isn’t so big as a receiver, and anyone can get it at a low cost. It generates a LAN ( local area network ), and this utilizes the connection procedure. There are two types of receivers available, and they give excellent support.
1. Active Hub
Active Hub is accepted to send those types of transmitting data after checking the algorithm and producing a new one. It is more affordable than passive Hub.
2. Passive Hub
Although the passive Hub doesn’t check to generate the data algorithm, passive Hub is popular between active and passive. It doesn’t generate any distinction between active and passive. So the budget-friendly passive Hub is acceptable to people, and it is also a wise decision.
3. Using Two-Channel Amplifiers
Normally, people aren’t familiar with the two-channel amplifiers because everyone is used to the receiver. But two-channel amplifiers also work as the receiver. It helps to transfer data from one device to a speaker without some difference and enhances sound and video quality.
To complete the procedure, you should find the right amplifiers which your speaker accepts. After finding the right one, you can attach both devices with a wire. Thus, the device forwards information to the amplifier and then transfers it to the speaker.
Although this equipment provides the best quality, It is very tough to find the perfect combination of amplifiers with the device and the speaker.
4. Using A Cable
A cable is a very important thing when you have no receiver. By using the cable, you can connect your device and the speaker. If you do so, you will get proper sound and video features.
For this, you attach the cable to the device’s out port, connect to the control box, and then add the cable to the speaker’s port. As a cable, you can use 3.5 to 3.5 mm cable or 3.5 to RCA cable.
After setting the cable, you ensure the sound setting of your device and adjust it as if the sound comes from the speaker and the device works as mute mode.
5. Applying Direct Connection
When you want a simple choice to hook up the surround sound speaker in the absence of the receiver, at this time, you can choose the direct connection option. In this method, you can connect the device’s port directly to the port of the speaker.
Although it is a straightforward method, it doesn’t work properly sometimes. And the user isn’t satisfied when they don’t get proper service. Moreover, it doesn’t provide high quality; rather, this connection destroys the sound quality. That’s why it is not preferable to the user.
Placing The Speakers
Place the speakers close to your listening area but not so tight that they block another sound. Generally, a distance of about 3 feet (1 meter) is ideal. Inserting the Speaker Cables, plug one end of the speaker cable into a speaker jack on the surround sound receiver. Plug the other end into an appropriate outlet.
Connecting The Audio
- Associate your surround sound receiver with your TV.
- Turn on your TV and the surround sound receiver.
- Click on the speaker icons on the screen (this will allow you to change the audio output).
4a If you have a 5.1 or 7.1 surround sound system, Your Speakers to Surround Sound Receiver
- Navigate to Settings on your surround sound receiver and select “A/V” or “Audio.”
- Select “Output,” then click on “HDMI” under the heading labeled “Video Output.”
- Select your three surround sound speakers from the drop-down menu and press “OK.”
- Make sure that the rear audio output on your TV is set to “HDMI ARC,” then connect the HDMI cable from each speaker to the corresponding HDMI port on your TV.
- Press “OK” in both settings menus and enjoy immersive surround sound.
Connecting The Speakers
- Ensure your speakers are plugging into each other and the power outlet.
- Position the speakers near or at the back of your TV, so they’re in line with the ears of people sitting in front of it (to get a good surround sound experience, you’ll need around six to eight feet between them and your TV).
- Try different locations until you find one that sounds good – be mindful not to place them too close to walls or other objects that might interfere with their sound quality.
Connecting Your Speakers To Surround Sound Receiver
1 ) Navigate to Settings on your surround sound receiver and select “A/V” or “Audio.”
2) Select “Output,” then click on the gear icon next to the word labeled “HDMI.”
3) Select your three surround sound speakers from the drop-down menu and press “OK.”
4) A If you have a 5.1 or 7.1 surround sound system, connect each speaker directly to an audio output jack on your TV: one for the left, one for the center, and one for the right. If you’re using an Antenna Connect or to connect your speakers, plug the three cables into one of the connector’s three ports (right and left front, left rear, center rear).
4b If you have a 2.1 or 3.5 surround sound system, you’ll need to connect each speaker wirelessly using “Surround Back” mode: press the button on each speaker until it turns blue (or green), then find an open spot in your home network where they can broadcast audio from (near a router if necessary) and set up your receiver accordingly. Press “OK” in both settings menus to save your changes and return to the A/V or Audio screen.
Select Cables For Specific Inputs And Outputs
HDMI output For connecting a TV or other display device to the projector. PC connection cable (red and white) This is used for connecting the projector to your computer, which facilitates downloading images and movies. USB connection cable (white) This is used for connecting the projector to a USB storage device, such as a digital camera, music player, or tablet.
Audio input cables (3 colors: red, black, and white) These allow you to connect an external audio source such as an iPod®, CD player, or MP3 player; the output from the projector then connects to these cables.
AC adapter (also three colors: red, black, and white) This needs to plug into an outlet and use the power cord to provide electricity to the projector. Power cord (also three colors: red, black, and white) – This needs to be plugged into an outlet and used to power the projector.
Final Thoughts:
Day by day, the modern world develops equipment according to man’s needs. When a problem arrives in front, it finds the solution to that risen obstacle. Otherwise, it finds another way to complete or acquire the service. Similarly, When a user has lacked a receiver, he can get another option to hook up the surround sound speaker.
After applying one of these easy methods, a user can get proper activities from the speaker, just like if he attaches the surround sound with the receiver. I hope now you know how Tto hook up surround sound speakers without a receiver.
FAQs
1.How Do I Connect My Receiver To My TV?
Ans: To connect your TV to the receiver, use “HDMI” output. For connecting other display devices such as DVD players or game consoles, use a “PC connection cable (red and white).”
2.What Cables Do I Need?
Ans: You’ll need the “audio input cables (3 colors: red, black, and white),” “AC adapter,” and “power cord.”
3.How Do I Know If This Article Is Reader-Approved?
Ans: Suppose you’re looking for an answer to a question. That has been asked before on the projector forum and hasn’t been answered in this article. If you still cannot find an answer to your question after searching through our articles, please feel free to post a query in the Forum topic corresponding to this article.
4.How Do I Optimize My Subwoofer Speaker Placement?
Ans: Suppose you’re trying to place your subwoofer near the front or rear of the room. Then aim it towards either side. If you want to spread the bass throughout most of your listening area, then position it centrally. Additionally, ensure that both speaker enclosures are level when sitting in front of them. So It will help create an even sound stage from floor to ceiling.
5.Where Should I Place A Subwoofer?
Ans: Generally speaking, place your subwoofer near the front or rear of the room, depending on its intended use.
6.How Do I Place The Surround Speakers?
Ans: You can place the surround speakers anywhere in your room, but be sure to adjust their height and distance from the back of your TV.
7.How Do I Know If My Receiver Is Connected To A TV?
Ans: If you’re using an HDMI cable, your receiver should display an “HDMI” logo on the TV. If you’re using a different type of connection, look for an appropriate audio input on your TV’s front or rear panel.
8.How Do I Connect My Front Speakers To The Receiver?
Ans: To connect your front speakers to the receiver, use an audio cable. So you don’t need an extra audio cable if your TV has a built-in speaker system.
9.How Do I Connect My Subwoofer To The Receiver?
Ans: To connect your subwoofer to the receiver, use an audio cable. You don’t necessary an extra audio line if your TV has a built-in speaker system.